Adjusting the Rollers on Your Anlin Sliding Patio Door
If your sliding patio door is hard to slide while opening and closing, the rollers may need be to adjusted.
Open the door slightly and look at the reveal or gap between the door and the frame.
The roller adjustment screws are located on both ends at the bottom of the sliding patio door.
Use a Philips head screwdriver to adjust the roller adjustment screw. Do not use a screw gun and be careful not to strip the screw. Turn the roller adjustment screw clockwise to raise up the door. Turn the roller adjustment screw counterclockwise to lower down the door. Continue making adjustments until the gap or reveal between the door and the frame is even from top to bottom. Adjust the other roller adjustment screw if needed.
Check to see if the door is sliding smoothly. Repeat these steps if further adjustment is needed.
Routinely clean the track with a vacuum or wipe thoroughly with a damp towel to keep sliding patio doors operating smoothly.